This post originally appeared in a great series called Bite Sized Sewing, hosted over at the wonderful CraftSnob.
The yard of Camp Sur I bought at CedarHouseFabrics had been in my stash waiting to be turned into a fake quilt for months when Sara contacted me for the Bite Sized Sewing series. Her offer to join the series gave me that necessary push I needed to finally get started on my project.
I have made (simple) quilts before, and always finished them off with bias binding, which takes quite a bit of time. In order for the project to be finished within the hour (strict instructions by Sara!), I opted for corded piping instead.
I used fleece as batting, as I didn't work with a classic 'quilt sandwich'. The quilting is done without the backing fabric (which is only added later), and regular batting wouldn't run through the machine as smoothly as fleece. If you prefer to use classic batting, you can always add a layer of thin fabric just to make it run smoothly.
- 1 piece of cheater patchwork fabric (Birch has beautiful cheaters in almost every collection)
- 1 piece of fleece or another type of batting (of about the same size)
- 1 piece of backing fabric (of about the same size)
- corded piping (length = circumferene of quilt)
- thread, pins, scissors, etcetera
I made a quilt with 1 yard of fabric. It can be finished in 1 hour. Ready? Steady? Sew!
0:00 Let's start with cutting the cheater fabric. If you would like the quilt to have only complete patches, cut your fabric in such a way that you have a 1/4" (7 mm) seam allowance all the way around. Round off the 4 corners with the help of a bowl or glass.
0:05 Pin the cheater fabric onto the batting, right side up. Next, stitch horizontal and vertical lines across the entire surface of the quilt. I stitched at foot width at both sides of each printed line, but you can also stitch right on top of each printed line, of course.
0:45 Cut off any excess batting. Next, stitch the piping onto the edge of the right side of the cheater fabric. Use your zipper foot (or a special foot for cording, should you have that). Clip the corners (you can also clip the corners after the next step, but then you'll have to cut through (too?) many layers).
0:50 Pin the right side of the backing fabric onto the right side of the cheater fabric. Next, turn the
entire piece upside down, so that the batting is now on top, and stitch around the edge, right into the stitch line you ran in the previous step. Leave a turning hole at the bottom of the quilt. Cut off any excess backing fabric.
0:55 Turn the piece right side out, and close the turning hole. No need to do this by hand, by the way; if you pull the piping aside a bit, you can run a stitch line which is as good as invisible..
1:00 Your cheater quilt is done! Time to do a little test: show your quilt to one of your housemates or friends. When my mom saw my quilt, the first thing she said was "Wow, all those little scraps of fabric you stitched together!".
He he :-)